Claude에 WhatsApp 연결하는 방법, 2분이면 끝나요
Claude에는 자체 WhatsApp 커넥터가 없어요. QR 코드를 스캔하고 링크 하나를 Claude에 붙여 넣으면 채팅 내용을 물어볼 수 있어요. 영상과 단계별 가이드.
- 얼마나 걸리나요?
- 2분 정도
- 필요한 것
- WhatsApp + Claude
- 코딩이 필요한가요?
- 아니요, 코드 한 줄도 필요 없어요
Claude를 열고 Customize → Connectors(맞춤 설정 → 커넥터)에서 WhatsApp을 검색해 보세요. 아무것도 나오지 않아요. Claude는 혼자서는 WhatsApp 메시지를 읽거나 보낼 수 없어요. Pluggzy가 그 사이를 이어 줘요. WhatsApp Web처럼 내 WhatsApp을 연결한 다음, Claude가 쓸 수 있는 커넥터 하나를 만들어 줘요.
Pluggzy에서 WhatsApp 연결하기
pluggzy.com에 들어가 계정 연결하기를 누르고 WhatsApp을 고르세요. 그다음 QR 코드 스캔하기를 선택하세요. 스캔할 수 없다면 전화번호로 연결해도 돼요.
- 비밀번호는 필요 없어요. 휴대폰에서 연결을 승인하면 돼요.
- 모든 건 내가 정해요. 메시지 보내기는 직접 켜기 전까지 꺼져 있어요.
휴대폰에서 연결하기
휴대폰에서 WhatsApp을 열고 Settings → Linked devices → Link a device(설정 → 연결된 기기 → 기기 연결)로 이동한 다음, 카메라를 화면의 코드에 맞추세요. WhatsApp Web을 연결할 때와 똑같아요. 몇 초면 연결돼요.
Claude용 링크 복사하기
WhatsApp이 연결됨으로 표시되면 내 AI에 추가하기를 누르고 Claude를 고르세요. Pluggzy가 세 단계와 내 링크를 보여 줘요. 복사를 누르세요. 나중에 다른 채널을 연결해도 링크는 똑같아요.
- 1커넥터 설정 열기Claude에서 Settings → Connectors → Add custom connector로 이동하세요.
- 2이름을 Pluggzy로 정하고 URL 붙여 넣기이 링크를 원격 MCP 서버 URL로 입력하세요.
https://pluggzy.com/mcp - 3연결하고 권한 선택하기로그인하고 사용할 계정을 고른 뒤, Claude에서 쓸 수 있는 작업을 승인하세요.
Claude에 커스텀 커넥터로 추가하기
Claude에서 Customize → Connectors를 열고 +, 이어서 Add custom connector(커스텀 커넥터 추가)를 누르세요. 이름을 Pluggzy로 정하고 링크를 붙여 넣은 다음 Continue를 누르세요. 다음 화면에서는 Sign in now를 선택한 채로 두고 Add, 그다음 Connect를 누르세요. 이 단계의 모든 화면은 Claude 설정 가이드에도 있어요.
“Send messages & posts” 체크하기
Claude가 브라우저에서 Pluggzy 페이지를 열어요. Continue connecting을 누르고 WhatsApp 계정을 고른 다음, Send messages & posts(메시지와 게시물 보내기)를 체크하세요. 처음에는 체크가 해제되어 있어요. 체크하지 않으면 Claude가 채팅을 읽을 수는 있어도 답장은 할 수 없어요. 그다음 Allow connection(연결 허용)을 누르세요. Claude가 무엇을 할 수 있는지는 내가 정하고, 언제든 되돌릴 수 있어요. Pluggzy가 계정을 안전하게 지키는 방법도 확인해 보세요.
질문 하나로 테스트하기
새 채팅을 열고 WhatsApp에 대해 물어보세요. 처음 한 번은 Claude가 Pluggzy를 쓰기 전에 허락을 구해요. Always allow(항상 허용)를 고르세요. 실제 채팅 내용으로 답하면 연결이 끝난 거예요.
가장 최근 대화는 서연 님과 어제 저녁에 나눈 대화예요.
• LinkedIn 공동 게시물: 같이 게시물을 올리고 공동 작업자로 태그하자고 제안했어요.
• 일정: 월요일에 올리겠다고 하셨고, 서연 님은 보내 주실 버전을 기다리고 있어요.
그 밖에 답해야 할 메시지는 없어요.
Claude가 WhatsApp으로 할 수 있는 일
WhatsApp Web에서 직접 하듯 WhatsApp을 다루고, 처음 무언가를 보내기 전에는 먼저 물어봐요. WhatsApp의 하루 한도를 포함한 전체 목록은 WhatsApp 문서에 있어요.
- 읽기와 검색
- 채팅과 그룹
- 요약
- 긴 대화와 읽지 않은 메시지
- 초안 작성과 전송
- 내 말투 그대로 쓴 답장
- 새 채팅 시작
- 전화번호만 있으면
- 파일 열기
- 받은 이미지, PDF, 문서
이제 Claude에게 물어보세요
시작하기 좋은 프롬프트 네 개예요. 하나를 복사해서 Claude에 붙여 넣으세요.
- 밀린 메시지
오늘 아직 답하지 않은 WhatsApp 메시지 요약해 줘
Claude에 붙여 넣으세요 - 답장
서연 님 마지막 메시지에 친근하고 짧게 답장 초안 써 줘
Claude에 붙여 넣으세요 - 찾기
이번 주에 WhatsApp으로 견적 요청한 고객이 누구야?
Claude에 붙여 넣으세요 - 보내기
팀 단톡방에 나 10분 늦으니까 먼저 시작하라고 전해 줘
Claude에 붙여 넣으세요
스크립트 읽기 (영어)· 영상 2:29, 11개 구간
- 0:00
How to connect WhatsApp to Claude. In another video, I already showed you how to connect WhatsApp to Claude, but some of you complained that you had to put your credit card to test it and that it was quite expensive after.
- 0:12
So I found another solution where it's free to start for many days and that costs ten times less. So, as you already know, if you go to Customize, then to Connectors, and you type WhatsApp, you don't have any official WhatsApp connector, so that you can send messages and do many other things with WhatsApp inside Claude.
- 0:29
So to fix that, you're going to click on the link in the description or go to pluggzy.com, and then you're going to click on Connect your account. Then on this page you're going to select WhatsApp, and here you have two ways to connect your WhatsApp account: either with a QR code or using a phone number.
- 0:46
I'm going to go with scan a QR code. Then you're going to go to WhatsApp on your mobile, go to your settings, click on Linked devices, click on Link a device, and scan the QR code. It will take a couple of seconds to connect.
- 1:04
Once your WhatsApp account is connected, you're going to click on Add to my AI, select Claude, copy that URL, and go back to Claude.
- 1:12
Inside Claude, make sure you are in Customize, Connectors. Then click on Add right here, click on Add custom connector, paste that URL, write Pluggzy and click on Continue.
- 1:28
After that, make sure you are in the sign-in mode, scroll down and click on Add. Then you will arrive on that page and you're going to click on Connect.
- 1:35
It will open this page in your browser, where you click on Continue connecting, and then make sure that you tick Send messages and invitations. Otherwise you will have problems having your WhatsApp account work well. Then click on Allow connection. WhatsApp is now connected to Claude.
- 1:53
So let's test it. Open a new chat and let's go with: what is my latest WhatsApp convo about? The goal here is just to test it quickly, to make sure the connection is stable, but obviously you can do a lot of things with this integration.
- 2:08
Here we click on Always allow. And there we have it: it says our latest conversation with an actual person is with Zunker, where we're talking about scheduling a LinkedIn post together.
- 2:20
You now know how to connect WhatsApp to Claude. Make sure to like this video and subscribe to the channel for more content like this. Cheers, bye.
자주 묻는 질문
Claude용 공식 WhatsApp 커넥터가 있나요?
없어요. Claude 커넥터 목록에는 WhatsApp 커넥터가 없어서, 대신 Pluggzy를 커스텀 커넥터로 추가해요. 링크 하나면 돼요.
QR 코드와 전화번호 중 무엇으로 연결하나요?
둘 다 돼요. QR 코드가 가장 빠르고, 스캔할 수 없다면 전화번호로 연결하세요. WhatsApp에 입력할 코드를 받을 수 있어요.
“Send messages & posts”는 왜 체크해야 하나요?
체크하지 않으면 Claude가 채팅을 읽을 수는 있지만, 답장이나 새 메시지는 모두 거부돼요.
같은 커넥터에 다른 채널도 연결할 수 있나요?
네. Claude에 붙여 넣는 링크는 그대로예요. Pluggzy에서 연결한 LinkedIn, Instagram, Telegram 등 다른 채널도 이 링크를 통해 Claude에 나타나요.